600BPH Semi Auto 2 Cavity 3L 4L 5L Bottle Blow Molding Machine

FP-500-2 blow molding machine with two cavities is especially used to produce 5L bottles and is widely used to produce any shape of plastic from PET with neck finishes from 15mm-200mm.

Controlled by a microcomputer, the technical parameters involved can be controlled more accurately.
The operation is simple and safe, only one person is required and no special training is required.
The semi-automatic bottle blowing machine can blow carbonated beverage bottles, mineral water bottles, cosmetic bottles, hot-filled bottles, especially oil bottles with handles.

Machine characteristics of 600BPH Semi-auto 2 cavities blow molding machine 0-5L PET bottle:
1. Blowing 3-5 liter PET bottles (one out and two out)
2. Using a two-cavity mold to blow 3-5 liter bottles, the output can reach 600 per hour.
3. Advanced PLC control system, time control can be accurate to 0.01 second.
4. Special air storage device.
5. Infrared preform heater.
6. Different heating lamps are equipped with independent temperature control devices to ensure the ideal heating effect of the preform.
7. The direction of the heating lamp can be adjusted according to different preforms.
8. Only one person is required to operate and no special training is required.
9. Installation and start-up are simple.
10. The scrap rate of finished products is less than 0.3.

Equipment list of 600BPH Semi-auto 2 cavities blow molding machine 0-5L PET bottle:

Parameters of 600BPH Semi-auto 2 cavities blow molding machine 0-5L PET bottle:

600BPH Semi Automatic Plastic Moulding Machine

4L Semi Automatic Plastic Moulding Machine

3L semi automatic moulding machine

600BPH Semi Auto 2 Cavity 3L 4L 5L Bottle Blow Molding Machine Images